Create a small, soothing waterfall and bring serenity into any space.
Supplies
Multicoloured glazed ceramic bowl, about 15 cm tall x 12.5 cm in diameter
One-colour glazed dish or bonsai planter, about 5 cm tall x 10.5 cm
in diameter
Submersible pump with spout (available at some nurseries) that's small enough to fit into bottom half of bowl
Safety goggles, dust mask, drill and masonry bit that accommodates spout (all optional)
Smooth pebbles
Instructions
1. Set pump's water-flow regulator to lowest setting. Place pump inside bowl with spout off-centre and close to side of bowl. Pour in enough water to cover pump's intake valve.
2. If necessary, drill centred hole for spout through base of dish, wearing safety goggles and mask; wipe off dust.
3. Fit hole over spout; angle dish on pump to conceal electrical cord and rest against side of bowl.
4. Arrange pebbles in dish, as desired, to conceal spout.
5. Plug in pump to check water flow; fine-tune placement of pebbles for visual and acoustic appeal and increase flow, if desired.
Tips
• If desired, fit short length of plastic tube (available where you purchase the pump) over the spout to extend height.
• Instead of pebbles, you can use small polished stones, glass marbles or shells.
• Place the finished waterfall at the back of the tabletop and near an electrical outlet so the cord is hidden.
• Ensure that the pump is always submerged; check the water level each time you turn it on.
