Heart scroll: Fold strip in half. Roll ends inward toward the centre crease forming a heart shape (Diagram 4). Do not glue. Simply reverse the direction of the coils to form a V scroll (Diagram 5).
S scroll: Loosely roll one end of strip toward the centre then roll the other end toward the centre in the reverse direction forming an S shape (Diagram 6). Do not glue. To form a C scroll, roll both ends of strip toward the centre (Diagram 7).
3. Trace pattern outline onto tracing paper or design your own pattern on paper. Tape tracing to cardboard and cover with waxed paper. Tape in place. Assemble all the coils and scrolls needed for the project. You may find it helpful to organize them in the compartments of a muffin tin. Using tweezers, arrange each quilled piece on the waxed paper following the design underneath. Use a toothpick to dab a tiny dot of glue on sides of pieces at points where they touch each other. Hold design in place with quilt pins stuck into the cardboard. When glue is dry, remove pins, spray design with sealer if desired. Glue design to project.Valentine card
You need:
All supplies listed under General Instructions
• Heavy card, 28 x 15 cm (11 x 6 in)
To make:
Fold card in half. Enlarge heart pattem onto tracing paper. Following General Instructions, make hearts, C scrolls and V scrolls from strips of paper cut to the lengths indicated on the pattern. Assemble and glue design, as shown below, then glue to centre front of card.
